xXx

Hexid M1n1 5h3ll MobiLe

C:/xampp/mysql/mysql-test/suite/rpl_ndb/t/_[ Writable ]

File:C:/xampp/mysql/mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test

# ==== Purpose ====
#
# Verify that errors or warnings are issued for all error conditions
# related to deciding the binlog format of a statement.  The possible
# errors are listed in a comment above decide_logging_format() in
# sql_base.cc.
#
# ==== Method ====
#
# Each error condition is executed; we verify that there is an error.
#
# ==== Related bugs ====
#
# BUG#39934: Slave stops for engine that only support row-based logging
# BUG#42829: binlogging enabled for all schemas regardless of binlog-db-db / binlog-ignore-db
#
# ==== Related test cases ====
#
# binlog.binlog_unsafe verifies more thoroughly that a warning is
# given for the case when an unsafe statement is executed and
# binlog_format = STATEMENT.

# Need debug so that 'SET @@session.debug' works.
--source include/have_debug.inc
# Need example plugin because it is the only statement-only engine.
--source include/have_example_plugin.inc
# The test changes binlog_format, so there is no reason to run it
# under more than one binlog format.
--source include/have_binlog_format_row.inc
--source include/have_ndb.inc
--source include/have_innodb.inc
--source include/ndb_master-slave.inc

disable_query_log;
call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
call mtr.add_suppression("Slave: Cannot execute statement: impossible to write to binary log");
enable_query_log;

--echo ==== Initialize ====

--echo [on slave]
--connection slave

SET @old_binlog_format= @@global.binlog_format;
INSTALL PLUGIN example SONAME 'ha_example.so';

--echo [on master]
--connection master

SET @old_binlog_format= @@global.binlog_format;
INSTALL PLUGIN example SONAME 'ha_example.so';

CREATE TABLE t (a VARCHAR(100)) ENGINE = MYISAM;
CREATE TABLE t_self_logging (a VARCHAR(100)) ENGINE = NDB;
CREATE TABLE t_row (a VARCHAR(100)) ENGINE = INNODB;
CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
CREATE TABLE t_slave_stmt (a VARCHAR(100)) ENGINE = MYISAM;
CREATE TABLE t_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;
CREATE TABLE t_double_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;

--eval CREATE TRIGGER trig_autoinc BEFORE INSERT ON t_autoinc FOR EACH ROW BEGIN INSERT INTO t_stmt VALUES ('x'); END
--eval CREATE TRIGGER trig_double_autoinc BEFORE INSERT ON t_double_autoinc FOR EACH ROW BEGIN INSERT INTO t_autoinc VALUES (NULL); END

CREATE DATABASE other;

# This makes the innodb table row-only
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;

--echo [on slave]
--sync_slave_with_master

DROP TABLE t_slave_stmt;
CREATE TABLE t_slave_stmt (a INT) ENGINE = EXAMPLE;

--echo [on master]
--connection master

# This is a format description event.  It is needed because any BINLOG
# statement containing a row event must be preceded by a BINLOG
# statement containing a format description event.
BINLOG '
1gRVSg8BAAAAZgAAAGoAAAABAAQANS4xLjM2LWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAADWBFVKEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
';


--echo ==== Test ====

--echo ---- binlog_format=row ----

--echo * Modify tables of more than one engine, one of which is self-logging
--eval CREATE TRIGGER trig_1 AFTER INSERT ON t_self_logging FOR EACH ROW BEGIN INSERT INTO t VALUES (1); END
--error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
INSERT INTO t_self_logging VALUES (1);
DROP trigger trig_1;
SELECT * FROM t_self_logging /* Should be empty */;
SELECT * FROM t /* Should be empty */;

--echo * Modify both row-only and stmt-only table
--eval CREATE TRIGGER trig_2 AFTER INSERT ON t_stmt FOR EACH ROW BEGIN INSERT INTO t_row VALUES(1); END
--error ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE
INSERT INTO t_stmt VALUES (1);
SELECT * FROM t_stmt /* should be empty */;
DROP TRIGGER trig_2;

--echo * Stmt-only table and binlog_format=row
--error ER_BINLOG_ROW_MODE_AND_STMT_ENGINE
INSERT INTO t_stmt VALUES (1);
SELECT * FROM t_stmt /* should be empty */;

--echo * Row injection and stmt-only table: in slave sql thread
INSERT INTO t_slave_stmt VALUES (1);
--echo [on slave]
--connection slave
# 1664 = ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
--let $slave_sql_errno= 1664
--let $show_slave_sql_error= 1
--source include/wait_for_slave_sql_error_and_skip.inc
--connection slave
SELECT * FROM t_slave_stmt /* should be empty */;

--echo [on master]
--connection master
--echo * Row injection and stmt-only table: use BINLOG statement
# This is a Table_map_event and a Write_rows_event. Together, they are
# equivalent to 'INSERT INTO t_stmt VALUES (1)'
--error ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
BINLOG '
1gRVShMBAAAALwAAAEABAAAAABcAAAAAAAAABHRlc3QABnRfc3RtdAABDwJkAAE=
1gRVShcBAAAAIAAAAGABAAAQABcAAAAAAAEAAf/+ATE=
';
SELECT * FROM t_stmt /* should be empty */;


--echo ---- binlog_format=mixed ----

--echo [on slave]
--sync_slave_with_master
--source include/stop_slave.inc
SET @@global.binlog_format = MIXED;
--source include/start_slave.inc
--echo [on master]
--connection master
SET @@global.binlog_format = MIXED;
SET @@session.binlog_format = MIXED;

--echo * Unsafe statement and stmt-only engine
--error ER_BINLOG_UNSAFE_AND_STMT_ENGINE
INSERT INTO t_stmt VALUES (UUID());

# Concatenate two unsafe values, and then concatenate NULL to
# that so that the result is NULL and we instead use autoinc.
--echo * Multi-unsafe statement and stmt-only engine
--error ER_BINLOG_UNSAFE_AND_STMT_ENGINE
INSERT DELAYED INTO t_double_autoinc SELECT CONCAT(UUID(), @@hostname, NULL) FROM mysql.general_log LIMIT 1;


--echo ---- binlog_format=statement ----

--echo [on slave]
--sync_slave_with_master
--source include/stop_slave.inc
SET @@global.binlog_format = STATEMENT;
--source include/start_slave.inc
--echo [on master]
--connection master
SET @@global.binlog_format = STATEMENT;
SET @@session.binlog_format = STATEMENT;

--echo * Row-only engine and binlog_format=statement: innodb-specific message
--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
INSERT INTO t_row VALUES (1);
SELECT * FROM t_row /* should be empty */;

# Commented out since innodb gives an error (this is a bug)
#--echo * Same statement, but db filtered out - no error
#USE other;
#INSERT INTO test.t_row VALUES (1);
#USE test;

--echo * Row-only engine and binlog_format=statement: generic message
SET @@session.debug= '+d,no_innodb_binlog_errors';
--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
INSERT INTO t_row VALUES (1);
SELECT * FROM t_row /* should be empty */;

--echo * Same statement, but db filtered out - no error
USE other;
INSERT INTO test.t_row VALUES (1);
USE test;
SET @@session.debug= '';
SELECT * FROM t_row /* should contain the value 1 */;

--echo * Row injection and binlog_format=statement: BINLOG statement
# This is a Table_map_event and a Write_rows_event. Together, they are
# equivalent to 'INSERT INTO t VALUES (1)'.
--error ER_BINLOG_ROW_INJECTION_AND_STMT_MODE
BINLOG '
cNpVShMBAAAAKgAAADYBAAAAABcAAAAAAAAABHRlc3QAAXQAAQ8CZAAB
cNpVShcBAAAAIAAAAFYBAAAQABcAAAAAAAEAAf/+ATE=
';
SELECT * FROM t /* should be empty */;

--echo * Same statement, but db filtered out - no error
# This is a Table_map_event and a Write_rows_event. Together, they are
# equivalent to 'INSERT INTO t VALUES (1)'.
USE other;
BINLOG '
cNpVShMBAAAAKgAAADYBAAAAABcAAAAAAAAABHRlc3QAAXQAAQ8CZAAB
cNpVShcBAAAAIAAAAFYBAAAQABcAAAAAAAEAAf/+ATE=
';
USE test;
SELECT * FROM t /* should contain the value 1 */;
DELETE FROM t;

--echo * Unsafe statement and binlog_format=statement
# This will give a warning.
INSERT INTO t VALUES (COALESCE(1, UUID()));
SELECT * FROM t /* should contain the value 1 */;
DELETE FROM t;

--echo * Same statement, but db filtered out - no message
USE other;
INSERT INTO test.t VALUES (COALESCE(1, UUID()));
USE test;
SELECT * FROM t /* should contain the value 1 */;
DELETE FROM t;


--echo ---- master: binlog_format=mixed, slave: binlog_format=statement ----

SET @@global.binlog_format = MIXED;
SET @@session.binlog_format = MIXED;

--echo * Row injection and binlog_format=statement: in slave sql thread
INSERT INTO t VALUES (COALESCE(1, UUID()));
--echo [on slave]
--connection slave
# 1666 = ER_BINLOG_ROW_INJECTION_AND_STMT_MODE
--let $slave_sql_errno= 1666
--let $show_sql_error= 1
--source include/wait_for_slave_sql_error_and_skip.inc
--connection slave
SELECT * FROM t /* should be empty */;
--echo [on master]
--connection master


--echo ==== Clean up ====

DROP TRIGGER trig_autoinc;
DROP TRIGGER trig_double_autoinc;
DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt, t_autoinc, t_double_autoinc;
DROP DATABASE other;
SET @@global.binlog_format = @old_binlog_format;
SET @@session.binlog_format = @old_binlog_format;
UNINSTALL PLUGIN example;
--echo [on slave]
--sync_slave_with_master
SET @@global.binlog_format = @old_binlog_format;
SET @@session.binlog_format = @old_binlog_format;
UNINSTALL PLUGIN example;

Your Access Expired	Date. in : 04-11-2025
Regist : 09-12-2024	Expired : 01-12-2027